Toshiba Satellite A350-2o

[tomodachi]

Hi all,
My bad, subject had to be Toshiba Satellite A350-22Z overheat problem, sorry.

I have a Toshiba Satellite A350-22Z which shuts down due to GPU overheating,
GPU on this model is ATİ Radeon HD3650.
Thermal compound replaced and fan is working very well.
I m running Furmark to see GPU temperatures, it starts at 65 C and goes up to 110 C in 5 minutes then shuts down to protect GPU from frying.
As I've checked there is nothing wrong with cooler sink or its fan and there is no scratch or crack on cooler copper pipe.
GPU driver is downloaded and installed from official
Anyone know how to solve this problem please ?

TIA
Best regards.

[fddizon]

Re: Toshiba Satellite A350-2o

which one has more heat? processor or GPU?

[spidey]

Re: Toshiba Satellite A350-2o

reball it, bad solders joints birader. noktasal temas var o yüzden ısınıyor.
kolay gelsin.

[fddizon]

Re: Toshiba Satellite A350-2o

spidey... what about if cpu is the one overheating? what should i do?

i have asus k40AD series with overheating processor..

[tomodachi]

Re: Toshiba Satellite A350-2o

reball it, bad solders joints birader. noktasal temas var o yüzden ısınıyor.
kolay gelsin.

Thank u so much agabey, your opinion is very correct.
but no time for reballing, already delivered to customer because he was being unpatient.

[spidey]

Re: Toshiba Satellite A350-2o

spidey... what about if cpu is the one overheating? what should i do?

i have asus k40AD series with overheating processor..

if the cpu is soldered on the board you can reball it too. if it is socketed then you may reflow socket but first of all make sure cooling system is fully operational and %100 efficient. check caps around, espacially nec/tocin if there. mosfets in vcore. Then you may reball or reflow.

Thank u so much agabey, your opinion is very correct.
but no time for reballing, already delivered to customer because he was being unpatient.

next time gardaş...

[fddizon]

Re: Toshiba Satellite A350-2o

spidey, caps i think are ok. voltages near cpu has 1.22volts stable. processor is socket type amd. cooling system i think is ok? do you have some tips in finding if it is faulty? fan is ok. (fan speed is in middle if there is 5 speeds) you can hear it loud spinning. no available pads near processor for me to add capacitors.