Toshiba Qosmio X305-Q701

[outlawz]

I am wanting to replace these two USB ports because they are broken on my laptop. I am having a hard time Identifying them with digikey to order the replacement. They are two different kinds. I was wondering if I might could get some help from any of you..Thanks

[outlawz]

Re: Toshiba Qosmio X305-Q701

Just a quick question? I got no response on this thread. I ordered 2 usb ports that I thought was the right one. One was right and the other was not. Am I not asking the right question or am I posting in the wrong thread or no one can answer my question? Just curious as to why I can not get a reply! I know I tried to get a answer on a monitor that I was trying to recap awhile back, I got maybe one response and that was it. I figured that one out myself and fixed it. All I want to know, am I not posting right or what??

[spidey]

Re: Toshiba Qosmio X305-Q701

this is the right place to send this post.

[spidey]

Re: Toshiba Qosmio X305-Q701

there are many many different usb connectors, just check the similar one from the nearest market. you will just compare the connectors pic. with yours. What kind of help you want ? You want someone to find a nearest shop to you and find the component on the web site and compare them for you ? You can also desolder from old mobos.

[outlawz]

Re: Toshiba Qosmio X305-Q701

there are many many different usb connectors, just check the similar one from the nearest market. you will just compare the connectors pic. with yours. What kind of help you want ? You want someone to find a nearest shop to you and find the component on the web site and compare them for you ? You can also desolder from old mobos.

No I do not want someone to FIND me a shop or FIND the component on the website for me. I wanted someone with more knowledge than me or YOU on buying usb ports. Like I said I found the one that sits on top of the board, but I cannot find the one that sits half and half on the end of the board.

[spidey]

Re: Toshiba Qosmio X305-Q701

plug pins are on the same side of the connector, so you can solder what you have found with a little bit modification of the SOLDER pins and then make sure you've placed it strong enough.