Announcement

Collapse
No announcement yet.

Compaq presario CQ70 no picture

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Compaq presario CQ70 no picture

    This laptop work normal on external monitor but wont show picture on primary screen.

    Is any option else reball nvidia chip ? model is NG523EAR#ABZ with intel processor.

    #2
    Re: Compaq presario CQ70 no picture

    Is it completely dead, or it turn on the light but nothing on screen. Or even it has something on display but no light???
    Maybe your display panel is dead, I think it is 99%

    Comment


      #3
      Re: Compaq presario CQ70 no picture

      Hi. Is dead, no picture no backlight at all. I suspect inverter or nvidia chip problem. I dont have ekstra inverter for check, how can I measure this inverter if is OK ??

      Comment


        #4
        Re: Compaq presario CQ70 no picture

        Now I try with 100% work LCD screen and flash bios with new version and no changes, still work OK on external.

        Comment


          #5
          Re: Compaq presario CQ70 no picture

          I think I found bad spot, the LCD flat cable is burned, 5 or more wires is melted between, so I use gordian knot procedure and freed wires, then make bypass. Now screen is white and if I turn laptop ON near (cca 1m) from home radio, the radio sugnal is interfere

          So I think I must do reball again, because this problem impact on radio even if the LCD cable and inverter are not connected to motherboard. I think the nvidia chip is not proper seat on motherboard or is faulty.

          I try and hope I will sucess, fingers crosed

          Comment


            #6
            Re: Compaq presario CQ70 no picture

            Hi. So I reballing nvidia and intel chipset marked red on picture. I will reball even last chip on this board, and maybe wil work.

            If any idea what can be caused this feller ?

            On start got white screen for 2-3 seconds then turn black and no changes, still work on external monitor OK.
            Attached Files

            Comment


              #7
              Re: Compaq presario CQ70 no picture

              try to re flow your nvidia gpu.

              Comment


                #8
                Re: Compaq presario CQ70 no picture

                Hi. I reball nvidia twice and intel one time, mark red on picture, I do not reball chip marked with cyan color.

                Comment


                  #9
                  Re: Compaq presario CQ70 no picture

                  I prijatelju sta si uradio??? je si li dobio sliku???

                  Comment


                    #10
                    Re: Compaq presario CQ70 no picture

                    Nisam još uspio, nije bilo vremena, ali sutra ču da probam još ovaj poslednji čip pa ako proradi OK inače nemam više ideja. Ali mi je čudno jer lcd kabal je bio zapaljen na mestu gde se najviše gužva tokom otvaranja i zatvaranja, ja sam lepo fino promenio sve zapaljene žice ali nisam 100% dali su svi u redu, jesam rasklopio čitav kabal ali ništa neobično se ne vidi, ma ako ne uspije uzeču drugu ploču i novi kabal, ali ovo ču da ostavim na stranu jer me stvarno zanima šta nije OK.


                    eng.

                    Not yet, there was no time, but tomorrow I will try to even this last and if the chip starts to work OK otherwise I have no idea. But I found it strange because the lcd cable was burned at the place where the most crowded during the opening and closing, I changed all the nice fine wire set on fire but I gave 100% all right, I have unfolded the whole cable, but nothing unusual to not see, however if fail I will take another plate and a new cable, but i shall leave that aside because I'm really interested what is not OK.

                    Comment


                      #11
                      Re: Compaq presario CQ70 no picture

                      try new cables, maybe that one burned, also try to measure voltages on lcd connector on motherboard. use schematics to see what voltage should be and take one by one pin. Maybe burned wires shorted something on board that burned

                      Comment

                      Working...
                      X