I got one problem, I try lift the GPU chip (nvidia) from this board, but this lenovo boards is a little tricky, becouse the epoxy is put under the chip in all corners, (look red marks on attachet picture) this is not red epoxy but some transparent sh** and no way to lift the chip, maybe if I use tweezers and force, but Im afraid I would pull out some pins from board or chip.
I look this video on youtube but Im a little skeptical that this is the right way to lift this chip, too much force and board movement.
Is any sugesstions how resolve this problem ?
Thankyou.
I look this video on youtube but Im a little skeptical that this is the right way to lift this chip, too much force and board movement.
Is any sugesstions how resolve this problem ?
Thankyou.
Comment