New Members
Please consider donating to this site if it has helped you. We rely on these donations.
Please also introduce yourself here Introduce yourself here.
And finally, Read the Forum rules here.
I found that 19v pins of flat cable was broken, so i connected with wire, but still nothing. cn2 pins1,2. Display now have 19v.
U2, L8 no stuff, so pin1 float. pin3=3.3v, pin4,5=3.3v
resistance on cn2, pin4=100k, pin5=82k, pin40=9k
Voltage not coming on cn2 pin40,4, before bios change.
My bios backup is attached...
Comment