Inductor for Asus FX506HC

[asdas09]

Which inductor is the right choice for motherboard Asus FX506HC NJJ DA0NJJMBAG0 ?

Motherboard boardview details: IND SMD 0.15U 20% 36A

This seems to have the same values, but the connection type looks different.
https://www.lcsc.com/product-detail/..._C5378499.html

https://www.lcsc.com/product-detail/..._C5307661.html

[mon2]

Re: Inductor for Asus FX506HC

Your attachment is not visible on my side. Can you check it?

[asdas09]

Re: Inductor for Asus FX506HC

Check again or this https://www.badcaps.net/forum/attach...8&d=1693245770

[mon2]

Re: Inductor for Asus FX506HC

Yes, both views work now.

Do you have the original inductor still available or is this part missing on the board?

Either way, measure the width of the solder pads on the PCB (or inductor).

Measure the size of the inductor (L x W x H). Measure the distance between the solder pads on the PCB (or inductor).

Post each dimension.

At this time - neither of the linked parts are suitable.

a) first part is not a good fit since the solder pins on the actual inductor are a long bar that may end up shorting the nearby SMD parts. The original is more like a single tooth for soldering vs. a full set of teeth.

b) the 2nd part is not a good fit as the peak current supported by this selection is much lower than the original rated @ 36A.

[asdas09]

Re: Inductor for Asus FX506HC

Inductor size L 7.10mm x W 6.80 x H 3.0mm.

[mon2]

Re: Inductor for Asus FX506HC

From where do you prefer to purchase these parts?

[asdas09]

Re: Inductor for Asus FX506HC

digikey.com and lcsc.com

Can this works with this motherboard? Amps and Isat, why different A value?
https://www.digikey.com/en/products/...-R15-R/6818955

Current Rating (Amps)
18.5 A
Current - Saturation (Isat)
36A

[Sephir0th]

Re: Inductor for Asus FX506HC

Since a Inductor almost never fails, do you mind me asking why you need this Inductor replaced...?

[asdas09]

Re: Inductor for Asus FX506HC

Inductor looks burned so when I removed it, a piece came off. I want to exchange it for a new one. I don't have the original inductor anymore. The motherboard include also the same inductor, so I got dimensions from them.