MSI 16JD1 ver 1.0 No display

[Jmine]

The motherboard is posting (Capslock is on and responding). But doesn't display anything. I measured display connector and on pins 38,39,40 20v is present, only 2.3v is present on pins 35,34,33,32. Guys, your help is greatly appreciated.

I have attached the Schematics.

[ktmmotocross]

Re: MSI 16JD1 ver 1.0 No display

remove cable from connector and measure. check 3V from PU12

[Jmine]

Re: MSI 16JD1 ver 1.0 No display

remove cable from connector and measure. check 3V from PU12

Now it is 3.5v at where it was 2.3v before. 3.5v present on 3rd pin of PU12

[Jmine]

Re: MSI 16JD1 ver 1.0 No display

Anyone?

[Sephir0th]

Re: MSI 16JD1 ver 1.0 No display

Check again with only Display cable attached, without panel. If voltage at +3V_LCD is still good, you have to troubleshoot the panel.

[Jmine]

Re: MSI 16JD1 ver 1.0 No display

Check again with only Display cable attached, without panel. If voltage at +3V_LCD is still good, you have to troubleshoot the panel.

While measuring the components around the display connector i was able to get picture. I guess it's working well now.