HP elitebook 2570P Just place/replace the laptop on table, its off

[usyusy]

HP elitebook 2570P, its got-off whenever i replace on any surface, table etc perhaps due to its battery alignment or something else),even i have applied double tape and it seems to be very tight but same phenomena, on the other hand, the laptop just remains ok when on Charger.

(Also battery health is normal and even gives good backup+no physical damage/loosing seems to be regarding its pins)

any guidance please.

[loopster]

Re: HP elitebook 2570P Just place/replace the laptop on table, its off

Cold solder joint on the battery connector pins to the mainboard maybe?
A reflow / apply new solder may help.

[usyusy]

Re: HP elitebook 2570P Just place/replace the laptop on table, its off

ok sir thanks so