Sony PS5 EDM-020 MIssing voltages near HDMI encoder

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • lilo2400
    New Member
    • Apr 2025
    • 3
    • Germany
    #1

    Sony PS5 EDM-020 MIssing voltages near HDMI encoder

    Hey guys..I have an EDM-020 and I'm missing these standby voltages marked with blue...I have already replaced the HDMI encoder IC but is still the same I have all the rest of 3v and 5v ...where does this voltage comes from does, anybody knows.

    Thanks in advance
    1 Photo
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • maneatingmonkey
      Missing LCD Panel Voltages VGH, VGL, VCOM (TCL 55P6US Sound & Backlight but NO Picture)
      by maneatingmonkey
      I have a TCL 55P6US with sound and backlight but no picture. This model does not have a T-CON board, and the right (rear perspective) panel board is fed from the left panel board. I have not been able to induce any change by disconnecting the secondary panel board or the tape cut-off method on the primary board.

      There are a bunch of voltages missing on the panel boards. I can't find any shorted caps of the panel boards, and all of the missing voltage rails read in the kiloohms, which leads me to suspect the issue may lie on the circuit board, rather than a short in the panel.
      ...
      L Panel #1
      11 Photos
      03-27-2024, 07:17 AM
    • karlp028
      MSI Z390-A PRO missing VCORE voltages
      by karlp028
      I've got an MSI Z390-A Pro motherboard that starts up fine, but it's missing the VCORE (and VGT) voltages. All of the other voltages are present (e.g. VCCSA, VCCIO) and I know the CPU (i7-9700k) is good. Now, the original PWM controller (UP9521P) had an internal short and I replaced it with a new one. All of the enable signals look good. The problem seems to be the PWM signals going to the MOSFET drivers. I checked them with an oscilloscope and they are all flat 1.5V with no pulses. I don't know why this would be and I'm not sure where to look next.
      06-23-2025, 01:25 AM
    • mohamed mm
      sony vaio mbx-247, missing S5_ON signal
      by mohamed mm
      Hi everyone, I hope you are having a good day.

      I have a laptop sony Vaio, DA0HK1MB6E0, MBX-247. REV: E

      The laptop suddenly shut down as the owner told me, so I did the normal check there is no short but the laptop it's not powering up and there is no light when I connect the adapter because there is no battery.

      so I checked.
      pu9:
      Vin: 19v

      Ldo: 4.89v

      Ref:1.99v

      Vcc: 4.89v

      Vdd: 4.89v

      output

      3.3v pcu.

      EN2: 4.89v

      but No      ...
      01-19-2023, 05:17 AM
    • mat2k
      Lenovo 300-15IBR - No SYSON, no SUSP#, bunch of missing voltages
      by mat2k
      Hello, I've been struggling with this one today. I'm troubleshooting a Lenovo 300-15IBR (board BMWC1/BMWC2 NM-A471) that turns on the power LED and does a bit of fan spin but nothing else. 3v3sb and 5vsb present, no 1.05v, no 1.35vddr, no vcore, no 1.8vsb.
      BIOS has been reflashed with one I found here, supposedly tested OK by someone else. I don't have an EC programmer unfortunately.
      I looked around and SYSON is 0v, SUSP# is 0v too. Forcing them to 3v3 enables the 1.35v rail, but the 1.05v and 1.8v rails are still missing (generated by PU704). EN_1P05A signal is 3.3v, and IN_1P05A...
      12-01-2024, 11:00 PM
    • Shushyamush
      Sony PS4 Missing component
      by Shushyamush
      Hello Ive just reballed a PS4 that had the BLOD but it still has the same symptoms.
      I noticed a component missing from the board, not sure how that happened, it there on all the pictures I look at of the motherboard,
      can anyone advise me what the value of the missing SMD is please?


      ...
      03-27-2024, 06:15 AM
    • Loading...
    • No more items.
    Working...