PS5 EDM10 No Power up Missing 1.8v

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • olane
    New Member
    • Nov 2023
    • 4
    • United Kingdom
    #1

    PS5 EDM10 No Power up Missing 1.8v

    Hi everyone, wondering if anyone had this issue before i've got all the other voltages 12v, 5v, 3.3v and 2v but no 1.8v i ive run through the voltages but the only outlier is the 1.8v are there any other probe points for it, also i cant seem to get any of the Power on voltages also cant find anything shorted to ground and the fuses seem to be intact.

    Any pointers would be amazing thanks for all your help.

    Oliver
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Capacitorial
      Powersupply has all the voltages - Monitor still no power
      by Capacitorial
      Hello guys,

      I have a Philips 240B7QPJEB. The monitor seems completely dead.
      I opened it and measured the voltages of the powersupply. I found that a mosfet was dead and replaced it.
      On the connector, that goes to the TCON board, all voltages 15-19V and 5V are present.
      The small connector on the left of the PSU has two cables with 18V and all the other have 0.2V. It connects on this small connector on the left ontop of the panel. I guess the backlight? Seens fine I guess.
      The weird thing is, that the Power LED is powered over the TCON board.
      On The TCON...
      12-28-2024, 02:12 PM
    • sam_sam_sam
      Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
      by sam_sam_sam
      I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

      One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
      03-31-2024, 02:12 PM
    • krob80
      PS5 Edm-010 No Power - Help identifying missing capacitor
      by krob80
      Hey everyone. I recently acquired a PS5 that is not turning on (no beep/power). PSU is good and there is no shorting on the 12V rail.
      It came with a Gen3 SSD installed so I feel that things went down hill for the previous owner when it was installed. F7003 was blown but there was nothing shorting to ground. I replaced the fuse but still no power (new fuse is still good for now).
      When connecting it to a bench power supply, it only pulls 10 mA (doesn't spike when first connected).
      I noticed that there are a couple capacitors missing from the Vcore power regulator (pictures attached)....
      05-15-2025, 04:24 PM
    • Tynan Dill
      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
      by Tynan Dill
      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

      Upon bringing it home and plugging it up, it showed a standby light.

      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

      The screen seems to blackout and stay black, but with a flashlight I can see the display.

      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

      Assuming...
      ORIGINAL POWER SUPPLY BOARD
      7 Photos
      11-22-2024, 01:46 PM
    • redbomb65
      msi mpg z390m gaming edge ac missing voltages and wont turn on when pressing the power button
      by redbomb65
      hi i have a msi mpg z390m gaming edge ac mb. that wont turn on when i short the 2 pins on the front connectror.
      im new in electrionic repair. and i hope that someone will share a bit knowledge, thoughts or ideas with me and others, to repair that damm thing ;D
      1. thought psu problem. nope psu is good. i even bought a psu tester to be save.
      2. thought a short somewhere that the psu goes in short save mode. nope... no short to measure with my multimeter to ground. psu and mainboard starts with all cabels plugget in, when i bridge green and black on the 24 pin.
      cpu isnt...
      01-24-2024, 08:36 PM
    • Loading...
    • No more items.
    Working...