hp elite0ne 800 G5 bio bin need. help pls
-
-
Re: hp elite0ne 800 G5 bios bin
Here is backup..HP ELITEONE 800 G5 23.8IN ALL IN ONE -
Re: hp elite0ne 800 G5 bios bin
EliteOne 800 G5 23.8-inch All-in-One↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
-
Re: hp elite0ne 800 G5 bios bin
Board number?Comment
-
Hi friend I have my bios dump of 800g5 sff With serial :CZC0028FQ9 No screen no boot just fan spin nothing more..please any helpComment
-
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
-
I have a 800 g5 tower displays picture but keeps restating
Serial number 4CE9451TF2.
Kindly rebiuld my attached bios binComment
-
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
-
Unfortunately the bin you game me didnt display.,Mine is working but has an error.Am attaching a photo of the error.Thanks for your assistance.Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
Hello, I have an HP EliteOne 800 G6 that I believe has some issues with the BIOS. The computer has entered a boot loop, and the only things it shows are the HP logo followed by an HP BIOS update message, and then everything starts over. I cannot enter the BIOS since, as I mentioned, only these two screens keep repeating.
I managed to dump the BIOS file, so if someone could look at what the issue is or if you have a different BIOS file that I could test.
Thank you for your help!
HP EliteOne 800 G6
Board: 20WWQ8BD3 (I think)
SN: CZC1169X44... -
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
Hello everyone,
I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details- Barebone / Chassis: TongFang GK7MRFR
- MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
- Rebrand: PC Specialist
-
Hello everyone,
I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.
When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.
I decided to try flashing a new BIOS, but since I didn’t want to desolder... -
First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If...
Comment