GTX 1080 ti Founders / reference / INNO3D

[xaff]

Hi I have an INNO3D GTX 1080 ti, the PCB is the same as the Founders/reference, the one with 2 inductors R22 on top.
https://www.hardware.fr/medias/photo...IMG0053362.jpg

I have good voltages everywhere except on clock, I suspect the straps to be dead.

I didn't find the schematics for the GTX 1080 ti Founders anywere.

Here are the straps:
https://postimg.cc/rRSf4Qr7

For convenience, I numeroted them:
https://postimg.cc/Hrky0rgx

Here are the values I measured:
a: 330 ohm
b: 330 ohm
c: 700 ohm
d: 700 ohm
e: 50k ohm
f: 50k ohm
g: 700 ohm
h: 78K ohm
i: 100K ohm
j: 700 ohm
k: 50k ohm
l: 50k ohm
m: 78K ohm
n: 78K ohm
o: 100K ohm
p: 0.03 nf
q: 0.04 nf
r: 187 nf
s: 181 nf
t: 189 nf
u: 189 nf
v: 182 nf
w: 182 nf
x: 182 nf
y: 182 nf
z: 176 nf
za: 187 nf

If anyone has the schema or the values that would be great !

[xaff]

Re: GTX 1080 ti Founders / reference / INNO3D

NeverMind, I have 0.9v on only one part of the oscillator, so it's probably it.

Where can I find an oscillator in 0.9v like this one ?
SK-6M
SKC 27.00

[xaff]

Re: GTX 1080 ti Founders / reference / INNO3D

I found this one but the datasheet doesn't say the operating voltage, is that normal?
https://fr.rs-online.com/web/p/quart...niques/1445086