Hello,

On my graphic card the voltage on quartz is 0.9v on pin 1 and 0 on pin3.

I assume this quartz is dead and I have difficulties to find another same one.

What will happend if I replace it by another 27Mhz 3.3v ?
My it works ?
Can it be destructive ?

Thanks

Re: GTX 1080 ti Founders / reference / INNO3D

I found this one but the datasheet doesn't say the operating voltage, is that normal?
[url]https://fr.rs-online.com/web/p/quartz-electroniques/1445086[/url]Re: GTX 1080 ti Founders / reference.../1445086[/url]

Re: GTX 1080 ti Founders / reference / INNO3D

NeverMind, I have 0.9v on only one part of the oscillator, so it's probably it.

Where can I find an oscillator in 0.9v like this one ?
SK-6M
SKC 27.00

Hi I have an INNO3D GTX 1080 ti, the PCB is the same as the Founders/reference, the one with 2 inductors R22 on top.
[URL="https://www.hardware.fr/medias/photos_news/00/53/IMG0053362.jpg"]https://www.hardware.fr/medias/photos_news/00/53/IMG0053362.jpg[/URL]

I have good voltages everywhere except on clock, I suspect the straps to be dead.

I didn't find the schematics for the GTX 1080 ti Founders anywere.

Here are the straps:
[URL="https://postimg.cc/rRSf4Qr7"]https://postimg.cc/rRSf4Qr7[/URL]

For convenience,...

Re: New Members - please post your introductions here

Hello from France,
I'm trying to repair my old friend (an inno3d gtx 1080 ti).
I have some knowledge an tools in electronics.