looking for boardview for this mb, need ram config to be able to replace ram on it, it's 4GB and i want to replace with 8gigs
Thanks !
Thanks !
-
-
Re: Mac Mini 820-5509-A A1347 boardview/schematic
Good night, dear achievement, find the brd file, I still need to replace the ram from 4gb to 8gb, you can provide me with an estimate in advance, thank you, you also replaced some resistance -
Re: Mac Mini 820-5509-A A1347 boardview/schematic
Hello,
so I need a boardviev and schematic of A1347 631-1739. can anyway help me?Comment
-
Re: Mac Mini 820-5509-A A1347 boardview/schematic
who can download the schematic for 820-5509Last edited by SMDFlea; 02-06-2023, 02:57 PM.Comment
-
Re: Mac Mini 820-5509-A A1347 boardview/schematic
I have Mini 820-5509-A A1347 schematic
Comment
-
Comment
-
I saw this thread https://www.badcaps.net/forum/troubl...1347-late-2012 but the board number is different.
Mine is 631-1993 2012 i5 2.5Ghz mac mini. I've searched a couple of days. I tried search back a few months ago. I can't seem to find the brd for that exact board. Any help is appreciated.01-08-2025, 10:26 AM -
Have somebody please iphone 12 mini boardview with component codes that are same like in schemas ? I need at least a picture of caps around nand. Or is there a way of "pairing" a component code from boardview with schemas ? I have boardview file from that large XZZ dump what can you find in this forum.02-20-2025, 04:37 PM -
Hi,
I'm looking for assistance with a Mac mini (M4, 2024), model A3238 (Model MCYT4LL/A), which I recently purchased. The front USB-C ports are not providing power.
Upon inspection, I've identified that a chip and an adjacent capacitor have been physically ripped off the logic board near the SSD connector.
Could anyone provide information on the specifications of this missing chip? Additionally, I would greatly appreciate it if anyone has access to the schematics and board view for the Mac mini A3238 logic board.
Thanks for your help!
... -
Hi everyone,
I've been troubleshooting a Mac Mini A1347 (820-5509) that came in for a simple thermal paste replacement, but it turned into a challenging repair. I've made some progress, but I'm stuck at a point and could really use some advice from those more experienced with this board
Worked fine for a week, then started powering on intermittently.
What I've done so far:
• Found PP3V3_G3H in short.
• Removed and replaced an AND gate (74LVC1G08) and an OR gate, which were causing issues on the line.
... -
Comment