Does anyone have boardview for this board?
Please help share it with me.
Thank you
MS-7C56 boardview
Please help share it with me.
Thank you
MS-7C56 boardview
-
-
Re: MSI B550-A PRO, MS-7c56, boardview request
Boardview -
Re: MSI B550-A PRO, MS-7c56, boardview request
Thank youComment
-
Is there any way you can make the file a .DWG file? I can't seem to open this file in anything.Comment
-
Openboardview https://github.com/OpenBoardView/OpenBoardView/releases
BoardViewer http://boardviewer.net/Comment
-
Hi all,
I'm looking for the BoardView file for an ASUS TUF Gaming A15 motherboard, specifically DA0NJM8C0 Rev C (Quanta NJI). My repair technician has identified a power regulation issue, and we need the BoardView to trace the power lines accurately....07-17-2025, 03:59 AM -
Subject: Request for Boardview – RX 6900 XT MSI GAMING Z TRIO
Hello,
I am looking to repair my MSI RX 6900 XT GAMING Z TRIO graphics card and need the boardview to perform an accurate diagnosis.
Would it be possible to provide it to me or let me know where I could obtain it?
Thank you in advance for your help.
Best regards,
Aurelia...02-06-2025, 02:21 PM -
Please i need assistance
Searching for a Boardview or Schematic for
Brand: HP
Model: HP ENVY 16-h1023dx Laptop INTEL i9-13900H
Motherboard: LA-M841P
A response will be greatly appreciated... -
Hello fellows,
I am putting a feeler out for a schematic (or ideally boardview) for the Biostar B660-T Silver motherboard.
I had let my guard down and decided to trust the Biostar supplied Windows based BIOS flash tool, only to find that the system would not POST upon restart.
no problem I thought - I would just flash using my trusty CH341 and be on my merry way.
Upon inspecting the board and locating its Winbond NOR, I found it in a rather precarious spot nestled between the RAM slots and PCIe slot and right next to a rather meltable-looking...12-13-2024, 09:37 PM -
Hello, please i need a schematic for my Asus ROG G703GI laptop.. I think my motherboard has a problem with the sound. Thank you!!10-16-2025, 06:21 AM
Comment