Gigabyte ga-970a-ud3p need bios

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • arber1232
    Badcaps Veteran
    • Dec 2019
    • 367
    • Albania

    #1

    Gigabyte ga-970a-ud3p need bios

    hi everyone i need bios for gigabyte ga-970a-ud3p is dual bios
    this is backup bios

    Attached Files
  • SMDFlea
    Super Moderator
    • Jan 2018
    • 20330
    • UK

    #2
    Re: Gigabyte ga-970a-ud3p need bios

    Originally posted by arber1232
    hi everyone i need bios for gigabyte ga-970a-ud3p is dual bios
    this is backup bios

    Get it from gigabyte support.There are different motherboard revisions rev. 1.0 and rev. 2.x ,so choose the right one.Flash the same bios to both chips.

    https://www.gigabyte.com/Motherboard...port-dl-driver

    .
    All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

    Comment

    Related Topics

    Collapse

    • razenxd
      Gigabyte ga-ax370 gaming 3 backup bios question.
      by razenxd
      Hello.
      A friend of mine gave to me the motherboard of the title.
      He had it in storage for a long time and he couldn't recall what the problem was.
      So I set the motherboard up on my bench and it wouldnt post at all.
      I tried to kick in the backup bios by holding power button and reset button for 10 seconds and then the motherboard booted and I got onto bios.
      Saved exit motherboard booted again.
      Left it overnight at the bench, and today its not booting again.
      Again it booted after I kicked in the backup bios.
      Isn't supposed that when you boot...
      05-30-2023, 04:53 AM
    • DiddiAb
      BIOS Backup / extract 16MB .bin - Lenovo ThinkBook 13s G3 ACN - 20YA0005GE
      by DiddiAb
      Recently I used the official Lenovo bios updater software on my ThinkBook 13s G3 ACN (20YA0005GE). The updating process failed and I got a black screen after powering the device. Of course I did not make an own backup before using the Lenovo bios updater.

      I bought a CH341A programmer and was able to make a connection to the chip while it is still soldered on board. But I did not realise that the chip was a 16MB size and selected the wrong size (8Mbit / 1 MByte) before reading the content of my chip. So the dump I did before erasing the chip is only 1MByte big. I fear that I lost...
      03-11-2023, 03:15 AM
    • Chris_stand
      Clevo PD50PNN won't boot after BIOS Backup
      by Chris_stand
      Hello,

      i hope to find help her in the forum. It is a littlebit tricky. I searched many Days about disabling IntelME that was may major task. So i have a Clevo PD50PNN motherboard.

      At first i tried to Backup the BIOS with tools direcly from Windows(normaly i am a Linux user). But no full success because not every part of the bios was readable. So i bought a modified CH341a for a Backup.

      Backup worked but since the backup the Laptop is not booting anymore. I flashed the newest Version oft the BIOS with success, verfiy everything ok.
      But the...
      04-28-2023, 03:08 PM
    • zenius
      [REQUEST] Dell G3 3579 BIOS Password & AMI Protected Range/BIOS Guard Unlock
      by zenius
      Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.

      Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,...
      12-08-2024, 06:13 AM
    • Wahaz
      Lenovo Thinkbook 15 G2 ITL i5 (serial number: MP2BFZEF) bios request
      by Wahaz
      Hello,

      I have a Lenovo Thinkbook 15 G2 ITL i5 Laptop (serial number: MP2BFZEF) that when I turn it on, the led on the power button lights up for 5 seconds, then goes out. There's no display and nothing happens.
      So I thought it was a Bios problem.
      I found 3 bios chips on the board, which I read with a bios programmer: two XMC model bios chips and a Winbond model bios chip. Each XMC model bios chip has two partitions named XM25QH128A [3.3V] and XT25F128A [3.3V]. And the Winbond model bios chip has three partitions named W25Q80BL 3.3V, W25Q80xV 3.3V and W25Q80DV 3.3V....
      10-30-2023, 08:42 PM
    • Loading...
    • No more items.
    Working...