i need dump for Dell PowerEdge T20
EC-4Mb
Main-8MB
EC-4Mb
Main-8MB
-
-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>> click on this link to donate via PayPal. <<<<<
Every donation made will go towards server fees and maintenance costs.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------- -
Re: i need dump for Dell PowerEdge T20
Service tag 1Z2KJZ1
sn 4297416733Comment
-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>> click on this link to donate via PayPal. <<<<<
Every donation made will go towards server fees and maintenance costs.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Re: i need dump for Dell PowerEdge T20
THANKS FOR YOUR HELP.
no change, power led blink 3TIMES,2TIMESComment
-
Hi everyone,
I’m working on a Dell PowerEdge R340 (Service Tag: JTMLKB2).
The iDRAC is bricked — system hangs at “iDRAC initializing,” fans at 100%, and no VGA output.
The cause is a bad firmware flash to the iDRAC SPI.
Board details:
- Model: Dell PowerEdge R340 (14G)
- iDRAC version: iDRAC9
- Flash chip: Winbond 25Q032 (32 Mbit / 4 MB)
- Location: iDRAC EEPROM near the BMC (ASPEED AST chip)
- Tool used: CH341A programmer
What I need:
- A clean, working 4 MB `.bin` dump of the 25Q032 from another R340... -
I need Dell PowerEdge R320 Bios dump
ST: 1P90J82
I don't have the original copy -
My question pertains to understanding the control circuity inside a Dell PT434 type battery used in Dell E6400, E6410 and other Dell notebooks?
Does anyone have a circuit diagram for the inside of a Dell PT434 battery and/or a description of how the control lines work to control this battery?
My reason for asking is I have a battery which I cannot get to charge beyond 1% in a Dell E6410 or E6400.
The LED bar graph charge indicator on the battery shows one LED lighted when the info button is pressed.
I have tried multiple different Dell power adapters. My Dell... -
Hi everyone,
help me please
I have an HL-DT-ST BD-RE GGW-H20N with ROM version: XA02.
When I tried to burn a 25GB Blu-ray disc using ImgBurn, I got an error.
I will share all the details with you, including the disc information.
...Code:HL-DT-ST BD-RE GGW-H20N XA02 (ATA) Current Profile: BD-R Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 12,219,392 Free Space: 25,025,314,816 bytes Free Time: 2715:27:17 (MM:SS:FF) Next
-
Hi there everyone!
I am awaiting on a CH341 programmer and a WSON 6x5 probe to dump the flash of a Dell 7320 8FC8 with Winbond 25R256JVEN chip, in the meantime I'd like to get things ready in order to maximise my chances of success. I have seen a few tools around, NeoProgrammer, Universal BIOS Backup ToolKit, CH341A Programmer, Flashrom to name some. Which one is the most recommended/suitable for this kid of application? The only one that seems to have support is NeoProgrammer New Update V2.2.0.10.
I find my self a bit confused, and I would rather getting a clean dump...09-09-2025, 01:53 AM
Comment