Hi,
I have a board as the title says and there are two bloated caps on it.
Some information about the failed capacitors:
1x OST RLX 105C 0730 6.3 V 1500 uF
1x OST RLP 105C 0730 6.3 V 1000 uF.
They are located between NB and the main power connector.
I ordered some Panasonic FR-series capasitors
(specific models EEUFR0J102 and EEU-FR0J152L)
but afterwards I noticed that their ripple current tolerances are
lower compared to the originals ones
(1580 mA vs 1650 mA and 950 mA vs 1540 mA).
(provided that i have read correct datasheets)
Is it okay to use them as replacements? Thanks for possible answers.
I have a board as the title says and there are two bloated caps on it.
Some information about the failed capacitors:
1x OST RLX 105C 0730 6.3 V 1500 uF
1x OST RLP 105C 0730 6.3 V 1000 uF.
They are located between NB and the main power connector.
I ordered some Panasonic FR-series capasitors
(specific models EEUFR0J102 and EEU-FR0J152L)
but afterwards I noticed that their ripple current tolerances are
lower compared to the originals ones
(1580 mA vs 1650 mA and 950 mA vs 1540 mA).
(provided that i have read correct datasheets)
Is it okay to use them as replacements? Thanks for possible answers.
Comment