I got broken GIGABYTE X570I AORUS Pro WIFI . The PWM controller was burned. I replace it but dont have a full working condition because I don't have original PWM wireframe. For repair I bouhgh another but working Gigabyte X570I Aorus Pro WIFI but configuration of MOSFETs was differents. My original board have configuration is
6 (VCORE) mosfets of TDA21472 +
2(VCORE_SOC) mosfets of IR3553M.
But in the bought motherboard has only
8 (6+2) mosferts of TDA21472.
So downloded PWM wireframe not works on my motherboard after burning working IC of PWM (IR35217).
Working PWM wireframe for 6+2 TDA21472 was attached
6 (VCORE) mosfets of TDA21472 +
2(VCORE_SOC) mosfets of IR3553M.
But in the bought motherboard has only
8 (6+2) mosferts of TDA21472.
So downloded PWM wireframe not works on my motherboard after burning working IC of PWM (IR35217).
Working PWM wireframe for 6+2 TDA21472 was attached
Comment