Has anyone got wiring diagram or help to trace where those pads on AM5 are going. Motherboard ASRock x870e nova wifi
ASRock X870E CPU socket ripped pads
Collapse
This topic has been answered.
X
X
-
Answer selected by iR0ck at 10-03-2025, 04:17 PM.
Hi, these pads look as not connected at all, otherwise they would have some track connected to them. Pads can't have vias inside the pad. Vias must be always beside the pad. Check them on any AM5 boardview to go sure. Unconnected pads tend very easy to get off when taking off the socket.- Selected Answer
-
Hi, these pads look as not connected at all, otherwise they would have some track connected to them. Pads can't have vias inside the pad. Vias must be always beside the pad. Check them on any AM5 boardview to go sure. Unconnected pads tend very easy to get off when taking off the socket.- Selected Answer
Comment
-
Hi, these pads look as not connected at all, otherwise they would have some track connected to them. Pads can't have vias inside the pad. Vias must be always beside the pad. Check them on any AM5 boardview to go sure. Unconnected pads tend very easy to get off when taking off the socket.Comment
Related Topics
Collapse
-
by GraphicManHello
someone forced the STR (FSCQ1265RT) out and ripped the pads off
now I need to reconstruct the tracks but I dont know how it will go (no prior pics before the damage)
Attached the affected area pic, pic 2 is the best i could found online for the same area
the pins from 1 to 5 are for the STR
any help is appreciated
Thanks...1 Photo -
ASROCK A55M-HVS Socket FM1 Motherboard Schematic...
-
Channel: Schematics and Boardviews
10-18-2024, 03:15 AM -
-
by pkslowkSr. Motherboard Debug Error Code Solution
1 Intel 845 E9 Bios Related Problem
2 Intel 845 D4 CPU Socket Related problem
3 Intel 845 37 Bios Related Problem
4 Intel 845 7C Bios Related Problem
5 Intel 945GCPE 34 Bios Related Problem
6 Gigabyte 845 2 Ram Related Problem
7 IBM Server A6 A7 Ram Mismatch Problem
8 Asus 845 29 CPU Related Problem
9 Lenovo I946 97 C-Mos Jumper related
10 Gigabyte 845 A0 CPU Related Problem
11 Asrock G31M-VS D7 Bios Related Problem
12 Compaq 845 BD-70G B0 CPU Socket Related problem... -
by Isabella91I have seen many posts where the eMMC can be read via a SD card reader, however can the opposite be achieved?
Read/Write a Micro SD Card from an eMMC Socket.
I have a Motherboard with a Kingston BGA153 ball socket, using HS400 bus mode, which is 8bit, as Micro SD is usually 1bit or 4bit mode, I accept that a loss of speed in read/write will occur, but I would sill like to convert.
Theoretically speaking, Im thinking if I hard solder DAT0-3 from eMMC to SD Card Reader, this should force 4-bit mode, or only DAT0 to force 1-bit mode.
Not to remove... -
by N²x²NI got this board but it won't power on.
Seller said it worked.
Guess I'm unlucky with boards lately
Thanks-
Channel: BIOS & Schematic Requests!
-
- Loading...
- No more items.
Comment