Gigabyte B450I AORUS PRO WIFI BIOS flash

[unimatrix93]

Hello everyone,

I bought a used ITX motherboard with a no display/POST and spinning fans. Original owner tried to update the BIOS and since then it's doing this. So something went wrong with BIOS update I assume.

I have a CH341a programmer and I did repair motherboards with it before.

Now I got the BIOS file from Gigabyte's site, but it's in a archive (F66g) or something and I don't know how to extract the bin from it.



How should I proceed with it?
Thank you!

[SMDFlea]

It doesn`t need extracting. Just rename the file extension from .F66g to .bin

[SMDFlea]

It doesn`t need extracting. Just rename the file extension from .F66g to .bin

[unimatrix93]

It doesn`t need extracting. Just rename the file extension from .F66g to .bin

*Mind blown*

Actually you are right, thank you!

[m1ch43lzm]

Warning: Please note you need a 1.8v adapter with the CH341A, otherwise you'll fry the BIOS, or something else on the board
All Ryzen AM4 boards use 1.8v flash chips