Gigabyte 1050TI 4GB No display

[Rofix]

Hi everyone, I wanted to ask you for some advice, I have a Gigabyte 1050TI 4GB card, without video output, I checked the output voltages and these are present,
.
12V ok
5V ok
1.8V ok
1V ok
leaving it connected and starting the integrated graphics card, it gives me an error of 43,
furthermore running MATS on this card gives me these errors

Thanks everyone for any advice

[ktmmotocross]

what advice u need? u knew chip with bad comunication

[Rofix]

Hi thanks, I wanted to physically understand the position of the faulty chip on the board, I don't want to make a mistake in removing a working one

[ktmmotocross]

.

[Rofix]

Thank you I will try to remove that chip and then I will update you

[Rofix]

Hi I removed the B1 chip but the card still doesn't work

[SenaDani]

No way... HAHAHHAAHAHHA
MAN!

[ktmmotocross]

u must reball or replace chip