VP6 CPU sockets - SMT devices

rohan.beckles

New Member

Join Date: Jul 2004

Posts: 1
#1

VP6 CPU sockets - SMT devices

08-01-2004, 08:58 AM

I have sent off a VP6 for capacitor replacement. While inspecting the board, the repairer noted that some of the surface mount devices around the CPU sockets had been knocked off.

This was probably due to me attempting to install a pair of Socket A/Socket 370 waterblocks. Does anyone know where I can get information regarding the nature and ratings of these devices? Many thanks.

"No greater love hath a man, than he lay down his life for his brother. Not for millions. Not for glory, not for fame - but for one person...in the dark...where no one will ever know, or see..."
- Sebastian, "Comes the Inquisitor", Babylon 5
Tags: None

Previous template Next

PS5 too many USB devices connected

by muhuruu

Hello. I have a problem with a PS5 console that I bought to learn electronics repair. The auction description indicated that the console had been dropped. The HDMI port and USB ports were damaged. The HDMI port was replaced by the previous owner, and after his repair, the console worked for 2 days and then became dead. After receiving the console, I replaced all the USB ports. After replacing them, the console started to turn on. On the logo screen, it displays "too many USB devices connected". My further attempts to fix the error involved replacing the Southbridge, 4 TPS2001D chips,...
- Channel: Troubleshooting Game Consoles & Other Weird Devices
05-19-2025, 07:14 AM
Lenovo Yoga 12 LA-A342P usb not detected but does charging devices

by dqtech

this laptop has been done by other tech...he did replace new usb port but problem still persist and early problem is both usb port not detected thumbdrive but it does charging device/phone...i need help to diagnos this problem

here the link for schematic - https://www.badcaps.net/forum/troubl...42p-schematics...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
03-15-2025, 09:59 AM
GIGABYTE X299 AORUS ULTRA GAMING - SATA PORTS 4-7 NOT WORKING ???

by DynaxSC

Hi,

I have the above mentioned bord after repair, which was related to a lot of missing smd devices on the back of the board.
There were almost 20 devices missing, caps, resistors and some diodes/mosfets.
The board is generally working now, all PCIe ports are working, Windows installs normally.

However I have a problem with SATA ports 4-7 (the board has 8 SATA ports) - disks are not beeing recognized by the BIOS neither by Windows (which is usually normal in case BIOS does not recognize them).
The SATA 4-7 driver network is quite simple chipset<->buffers/drivers<->SATA...
- Channel: Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
03-10-2025, 12:27 PM
ASUS TUF X570-PLUS doesn't power on: no VRM_EN signal.

by ShadowAi

Hello, I have an issue with the motherboard. Specifically, it doesn't power on, more precisely, the POST initialization doesn't occur.

Let me start from the beginning, the motherboard suddenly stopped working one day. There are no beep signals from the speaker, and the debug LEDs are not lighting up. After inspecting it under a microscope and using thermal imaging, I didn't find anything that could be damaged.

After that, I began voltage measurements, in which I noticed the absence of VDDQ, VDDP, VTT, and VPP lines. Later, I checked if there is an EN state on these lines,...
- Channel: Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
03-15-2024, 10:46 AM
Medical Devices Service Manuals

by Med-Tech

Hallo, anybody know where to get service manuals for Medical devices (other than Franks hospital)? The problem I have is with a physiotherapy machine it shows nothing on the display and the green LED flickers.[

Thanks in advance....
- Channel: General Electronics Technical Discussion
05-24-2025, 05:43 AM
Loading...
No more items.

VP6 CPU sockets - SMT devices

VP6 CPU sockets - SMT devices

Related Topics