I have a HP L1510 monitor that is starts up ok, displays normally, and then starts going to a white screen. I have been able to hit on the bottom front of monitor and then the normal display works. Sometimes it will work a-ok for awhile and whamo white screen. Need to find out how to disassemble the monitor so I can see where the problem is.....thanks in advance
-
-
Re: HP L1510 opening case
Most of these monitors need to be pryed apart with a screwdriver, butter knife, putty knife, credit card, oyster shucker,etc (I saw a post a few days ago on that one). You can see youtube videos of some demonstrations by searching for lcd repair.
Once open, check for loose connections or suspect/dry/cold solder joints. Check the caps too.
Originally posted by George Ortiz--- begin sig file ---
If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.
We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.
Please do not post inline and offsite as they slow down the loading of pages.
--- end sig file --- -
Re: HP L1510 opening case
It think the chasis is identical with HP L1535 so you can probably check this pdf document on how to disassembly this model
Comment
-
Re: HP L1510 opening case
Thank you very much,
This is exactly what I am looking for.Comment
Comment