Hi guys;i have a Samsung Sync Master 2493Hm and it works great but i have an issue when using it connected to my Win 10 I5 ATI video card HD on any Video streaming ,i use HDMI or DVI ,it plays video fine for a few minutes and then monitor turns itself off,i have to power of and on for the pic to come on,i have the manual and it says monitor is 1920x1200 maybe that's the issue?on page 85'' it satates;
Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes, the
screen will be adjusted automatically. However, if the signal differs, the screen may go blank while
the power LED is on. Refer to the video card manual and adjusts the screen as follows.
Specifications
Maybe that' s my issue; please advise,thanks
https://cdn.badcaps-static.com/pdfs/...65f53c1d9d.pdf
Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes, the
screen will be adjusted automatically. However, if the signal differs, the screen may go blank while
the power LED is on. Refer to the video card manual and adjusts the screen as follows.
Specifications
Maybe that' s my issue; please advise,thanks
https://cdn.badcaps-static.com/pdfs/...65f53c1d9d.pdf
Comment