Re: LCD 19" BENQ T905 problems
My standard operating procedure with these monitors is:
If you haven't done all 4 steps in the list you will have a repeat failure.
My standard operating procedure with these monitors is:
- Replace all of the secondary caps.
- Desolder all 4 inverter transformers legs and reflow them with new solder.
- Desolder all 4 transistors and the polyester caps (between the transistors) and inductors (nearby the transistors) for the inverter and reflow them.
- Check the rest of the board over with a magnifier for other bad joints.
If you haven't done all 4 steps in the list you will have a repeat failure.
Comment