I'm unsure if this issue is truly a caps issue, but I'm hoping that someone might be able to at least point me in the right direction. I have a Samsung T240HD, and the monitor/tv has started to buzz very loudly, as well as fade and flicker. I can also smell something slightly burning at times. This will happen on any input, even if there's no input connected. But the issue is intermittent, there's times when the tv will work ok for 10 minutes and go nuts again.
Here's a video of the issues that I'm seeing (apologies for the cell phone quality, but it will show the issue):
http://youtu.be/ARmHywbBMZ4
And here's some pictures of the boards:
http://www.the-noke.com/board_front.jpg
http://www.the-noke.com/board_back.jpg
I don't see any caps that are bulging. There is one resistor that seems to be burnt a bit on top, but I'm not sure if that's an issue. This is all pretty new to me. The monitor just ran out of warranty, so I'd rather see if I can fix it myself before going another route.
Any ideas? Thanks!
Here's a video of the issues that I'm seeing (apologies for the cell phone quality, but it will show the issue):
http://youtu.be/ARmHywbBMZ4
And here's some pictures of the boards:
http://www.the-noke.com/board_front.jpg
http://www.the-noke.com/board_back.jpg
I don't see any caps that are bulging. There is one resistor that seems to be burnt a bit on top, but I'm not sure if that's an issue. This is all pretty new to me. The monitor just ran out of warranty, so I'd rather see if I can fix it myself before going another route.
Any ideas? Thanks!
Comment