I-Inc IF281D Display Problem

[jetadm123]

Re: I-Inc IF281D Display Problem

What you're showing is the power supply. The inverter is the board that generates the high voltage for the backlighting. In your third photo, it appears to be the board at the very top with all the transformers on it.

[AloofOne]

Re: I-Inc IF281D Display Problem

Here is the inverter board picture. If you need more let me know. again thanks for your help.

[jetadm123]

Re: I-Inc IF281D Display Problem

Please post a photo of the entire inverter board. A overhead shot is preferred because that allows us to see all the components. And take your photos as if you're asked to read the printing on the board itself. Your previous photos of the printing at an angle and sideways makes for akward viewing.

[AloofOne]

Hi all I'm new here and while searching for internet for possible solutions to my problem i noticed this great forum and thought i would ask for any advice that might help me solve this issue.

I have an I-Inc 28inch monitor that has a display/power problem. One day while i was at the office i tried turning the monitor on and was working fine for about a minute or so until it shut itself down. I turned the monitor back on again and this time it shut down in about 20secs, a third time and it shut down almost immediately. I tried different power cables and different inputs but get the same result.

I called the manufacturer who promptly told me the monitor is out of warranty and could not help me. So instead of trashing this nice monitor i was hoping to repair it. Any advice would be appreciated =).