Hy
I got a friend that has a "Fujitsu SOUNDSYSTEM DS P2100 Tube"
The main IC that controlls just about everithing is dead. It is a AT89C2051-24SU.
I removed it from the circuit, added a couple of 0 value resistors on the volume IC (that was controlled through I2C protocol by the main IC) and now the hole system sounds like crap ... just a regular high pass in the two small speakers and a low pass in the subwoofer ... no surround
So I was hoping that someone had a firmware for the thing so I can program another AT89C2051-24SU
Thanks
I got a friend that has a "Fujitsu SOUNDSYSTEM DS P2100 Tube"
The main IC that controlls just about everithing is dead. It is a AT89C2051-24SU.
I removed it from the circuit, added a couple of 0 value resistors on the volume IC (that was controlled through I2C protocol by the main IC) and now the hole system sounds like crap ... just a regular high pass in the two small speakers and a low pass in the subwoofer ... no surround
So I was hoping that someone had a firmware for the thing so I can program another AT89C2051-24SU
Thanks