B&W ASW600 schematic

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • iganas
    Member
    • Mar 2016
    • 14
    • Denmark
    #1

    B&W ASW600 schematic

    Does anyone have a ASW600 schematics to share?

    I have a Bowers & Wilkins ASW600 subwoofer for repair with a few blown capacitors at the power supply side. Since PSU and amplifier circuits are on the same board, the blown caps managed to take out nearly a dozen of other components.
    After replacing the blown parts, it still won't power on, and just attempts to draw current for a split second every 10 second or so. Without a schematic this is becoming a true witch hunt...
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • sofles
      Bowers & Wilkins PX7 S2 Needed help with identifying charging IC
      by sofles
      Hi there,

      Recently I bought broken Bowers & Wilkins PX7 S2, the problem with them is that battery discharges on its own even with headphones turned off. It is a quite common issue with this model and even with model higher PX8.

      With help of thermal camera I found out that there is one IC that is hot even with headphones turned off. To check if I'm correct I bought another PX7 S2 working one and replaced small charging board with this IC and problem solved, battery no more drains on its own. After changing board back to original problem returned so I'm 100% sure problem...
      05-30-2025, 01:11 PM
    • sigh45
      Bowers & Wilkins PX7 S2e Internal Photo's
      by sigh45
      This is a long shot but does anyone have a photo of the USB Charge board wiring? I have a pair here that somebody has used a blowlamp to get the port off, Luckily the tracks are all good but some of the NC and filter cables were desoldered. A new port is fitted but there isn't a sniff of any marking on either side of the headphones as to the cables use. Here's hoping

      Cheers

      Simon
      11-09-2024, 07:46 AM
    • TinkerTron
      Schematic vs. Reality: Where Are the Resistors on My Sharp Clock Radio? Model FY-70CH
      by TinkerTron
      Hey everyone,

      I'm currently working on a mid-70s Sharp Electronic Digital Clock Radio, Model FY-70CH. I found the service manual online, printed it out, and have been studying it for a while. My main reasons for tackling this are: (1) I want to learn electronics and figured I'd start with something I had on hand, and (2) I want to fix its issues. Right now, the radio sounds awful, has about 5V DC at the speaker terminals, and the alarm time setting doesn't work. But I'm not asking how to fix these problems.

      Instead, here's what's been bugging me so far:
      The schematic...
      3 Photos
      03-06-2025, 02:03 PM
    • atunguyd
      Acer x163w Monitor PSU schematic
      by atunguyd
      Ii wonder if anyone can help me. I have a Acer x163w monitor which is not powering up. The PSU main capacitor's one leg had completly come off - I replaced it but the PSU is still not outputting DC. I found the monitor in questions service manual here on manuals lib but the schematic in there is a completely different - the schematic shows no mosfet to drive the transformer while the one I have does use a mosfet - also the schematic shows only one optocoupler but mine has two.
      The PSU board is labelled FM-20A02-AAA made by APD as per the image below. I am trying to find a schematic for this...
      03-05-2025, 02:08 PM
    • Thetechdude
      MSI Ventus RTX 4080 16G Broadview schematic needed
      by Thetechdude
      Hi guys, I'm working on a MSI Ventus RTX 4080 16G. The GPU has 12v, 5v, however what I assume is the 1.8v rail has 1.1v and what I assume to be PEX is 0v. As you may have guessed already there is no Vmem and no Vcore.

      I have looked around in related forum posts for a schematic so Much appreciated if anyone can share a Broadview schematic.

      Thanks.
      07-15-2025, 11:15 AM
    • Loading...
    • No more items.
    Working...