Re: Thermador Oven Controler Dim display
So checked everything again today. Looks like the only thing they replaced on the board were the capacitors. I found one that was loose and not tracing out properly so I soldered some wire to fix that. Checked all the other solder joints that they did but didn't find any problems. Put control board back in and still the F1 error. Tested the temp sensor again for both resistance (1080 ohms) and ground fault (that passed). Unfortunately I can't get anything other that the F1 error on the screen so can't check what temp it thinks it is.
Didn't check the elements, but I guess I can try that next. Any other ideas?
So checked everything again today. Looks like the only thing they replaced on the board were the capacitors. I found one that was loose and not tracing out properly so I soldered some wire to fix that. Checked all the other solder joints that they did but didn't find any problems. Put control board back in and still the F1 error. Tested the temp sensor again for both resistance (1080 ohms) and ground fault (that passed). Unfortunately I can't get anything other that the F1 error on the screen so can't check what temp it thinks it is.
Didn't check the elements, but I guess I can try that next. Any other ideas?
Comment