Hi,
can someone help me identifying this component please ?
Thanks
can someone help me identifying this component please ?
Thanks
Attached Files
-
-
Can you measure the voltages on the pins? Could it be a load switch? -
Is this service manual of any use?
https://elektrotanya.com/asus_vivobo...wnload.html#dl
Could it be something like these?
https://pdf.datasheet.live/a66300f6/....pdf#view=FitH
https://www.glfipower.com/component/...ocument&id=175
Different part, but not clear enough to identify:
https://www.accessoires-asus.com/ima...5505004821.jpgLast edited by truclacicr; 07-30-2025, 03:57 PM. Reason: Different part, but not clear enough to identify:Comment
-
Maybe this?
AP22811AW5-7, single channel current-limited integrated high-side power switch optimized for Universal Serial Bus (USB) and other hot-swap applications.:
https://docs.rs-online.com/7ec6/0900766b815e2f93.pdfLast edited by truclacicr; 07-30-2025, 04:17 PM.Comment
-
Thank you for your help 🙏
AP22811AW5-7 seems to be the good one, pinout seems good. I will check the voltage today and updateComment
-
pin 1 5v to USB
pin 2 gnd
pin 3 none
pin 4 connected to EC chip
pin 5 +5v
Seems good 🙂Comment
-
Hello everyone,
I have a problem with my Acer predator XB241YU screen. When I plug it in, the startup LED turns on instantly, and I can't turn off the screen without unplugging it.
After disassembly and inspection of the electronic cards I found what looks like a broken inductor, it is marked with the letter A and is at location L58.
In the first photo you can see the broken component, in the second photo you can see where it is on the board, in the third photo you can see the silkscreen and in the fourth photo you can see the identification sticker of the main board
I... -
Hey guys! my name is kyle, new to motherboard troubleshooting and a little confused still on chip identification if yall could help identify this chip..
also if you could teach me how to fish on this particular topic... i did read through the ic identification sticky, and couldnt identify this with that info... thanks!
EDIT, just realized thats a 5 and not an S in the first line... finding results for it now. cant figure out how to take down thread so im not embarrassed... -
Good morning, I would appreciate help identifying resistors responsible probably for volume down / volume up buttons that I accidently knocked off while replacing fan connector. I enclose picture with location. Thank you for help in advance.07-19-2025, 01:49 AM -
I need help identifying this IC and, if possible, the value of the capacitors next to it. It is part of the HDMI circuit of an EVGA RTX 2060 GPU. It suffered a short circuit, leaving the graphics card without video and the TV without image....06-06-2025, 07:48 PM -
Subject: Help Identifying IC on 820-02020 (MacBook Pro A2338 M1, 2020) — C02045500 / EKQ8LL1A
Hi all,
I'm working on a MacBook Pro A2338 M1 (2020) with logic board 820-02020.
The machine has a power issue — not powering on, and I'm trying to trace the fault.
While inspecting the board, I found a cluster of components
This area looks damaged or burned — there are about 4–5 components that seem affected
I've attached a close-up photo of the chip and its surrounding area (see...
Comment