cross reference for obsolete parts

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • fleetwise
    Member
    • May 2011
    • 38
    • USA

    #1

    cross reference for obsolete parts

    Can anyone recommend a link? I'm looking for something to replace a ON semiconductor power factor controller, part # mc33232p. ON, retired this part last year and their substitute list shows "none available" as a suitable replacement from them.
  • killian6pk
    Badcaps Veteran
    • Apr 2010
    • 502
    • USA

    #2
    Re: cross reference for obsolete parts

    You might try NTE Electronics. They have a large line of components and have an online cross reference tool. I don't know a lot about their quality, but I have bought some of their parts that were hard to find else where.

    http://nte01.nteinc.com/nte/NTExRefS...f?opendatabase

    Have you ever stopped to think and then forget to start thinking again?

    As a very wise man once said on this forum: "Of all the things I have lost I miss my mind the most."

    Comment

    Related Topics

    Collapse

    • connorcc2005
      Thermistor specs and cross reference
      by connorcc2005
      Hi,

      I'm getting some conflicting information and thought I'd toss it out to all of you for input.
      What I have is a TTC-104 thermistor. This is part of a temp sense circuit that will drive a small 12v fan to cool components mounted to SMPS heat sink.
      The physical diameter of the piece is 5.1mm measured with a caliper.
      Other than what you see in the pic, there is no other writing on the part.

      My research of the TTC-104 says it should read 100 ohms at 25C. Out of circuit measurements have it at approximately 100k. It does change as the temp changes....
      06-16-2022, 04:16 PM
    • Mark D
      Samsung UN65JU67ODFXZA Version TD01 Schematic and Parts List
      by Mark D
      The TV is a Samsung UN65JU67ODFXZA Version TD01. I replaced the power source board and the TV is now working, but I decided to try and troubleshoot the old board to fix at the component level. Trying to get a schematic and a parts list has proven to be an issue. Trying on my own, I can't tell you how many times my Norton security has flagged sites as "malicious". I ordered a service manual from ServiceManuals.net, paid $16.99 and got 66 pages of everything BUT schematics and component parts list! Can anyone steer me in the right direction? Some of the surface mounted component parts...
      10-29-2024, 03:15 PM
    • quickname
      Cyberpower 1500AVR UPS repair
      by quickname
      I'd like to start out by thanking this forum for providing the info to be able to repair my 15 year old CP1500AVRLCD UPS. Here is all the info I gathered during my trouble-shooting and re-capping.

      Like clockwork, I've had to replace the SLA batteries every 4 years. It was about that time and the UPS was acting like it needed new batteries... randomly shutting off with AC present, not being able to charge fully, and poor runtime when AC was removed. So, I replaced the batteries but noticed that it was not charging properly.

      I decided to verify that the batteries were...
      11-12-2023, 09:57 AM
    • jasko_jacker
      cross reference tps51285a
      by jasko_jacker
      I try to substitute the RT6575B with TPS51285A,
      it seems to work but it is slightly warmer, the board does not start due to other problems so but not sure if replacement is possible...
      12-07-2021, 01:49 PM
    • speaktorob
      Reference Nvidia GTX 980 ti - looking for a new shroud
      by speaktorob
      So a while back, to deal with the fan noise of the old blower style shrouds on the reference cards, I chucked it and installed the monster that is a Raijintek MORPHEUS 8069, with a couple Noctuas on it. Did the job but quite unwieldy tbh.

      Anyone know which boards would have a compatible shroud for it? I know the EVGA used the reference board but wondering if any other manufacturers did. I want to put something sensible back on it, but I'm having a hard time getting hold of even a faulty reference board for a reasonable price.
      03-22-2024, 03:00 AM
    • Loading...
    • No more items.
    Working...