Looking at this on ebay, wouldn't be in everyday use just for the odd repair job anybody using this type of setup?
http://www.ebay.ie/itm/2-1-SMD-HOT-A...item231a3f6976
http://www.ebay.ie/itm/2-1-SMD-HOT-A...item231a3f6976
-
-
Re: Solder station?
I bought one & I have use it a lot useful for me in my bench I have to admit this is an economic way to do small jobs we may requiere a better machine for some other jobs.
-
Re: Solder station?
Looks like a clone of the Atten 8586.Comment
-
Re: Solder station?
Good kit to start out with, certainly better than nothing."Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
-David VanHornComment
-
Re: Solder station?
Don't know if they ship overseas but this is an excellent station for the price.
http://www.circuitspecialists.com/csi701a.htmlComment
-
Olá.
Looking for some help clarifying something.
I have a Tenma (Farnell-rebranded) 21-10115 solder station which recently burnt out the ceramic element.
The station is 60W / 28 volts, 110v.
Right now I'm in Brazil and finding an equivalent element has proved to be not possible, so today I bought a 'Yaxun' 50W 24v iron in the hope that it would work.
Both irons have a five pin plug.
The Tenma had pins 1 & 2 and pins 4 & 5 shorted with pin 3 being the ground. No means of measuring the temperature.
... -
Hi All...any One have firmware for Quick 857D hor air solder..please share ..
Thanks..06-13-2024, 08:35 PM -
Hello.
I have a soldering station, 862D+, and every time the hot air gun is on, even if it is just cooling off, the soldering iron controller stops controlling. Let me explain what has happened so far, as it took a while to get to this.
First, the switch that turns on the hot air gun started to fail, the light came on, but temp never rose, I would have to switch it multiple time to get the gun to start heating, this was due to the contact inside being carbonized. I opened the switch up, clean the contacts, and it would work fin for a while until carbonized again. So, I ordered a switch... -
This specification for the HP Station de travail Z2 format tour G4 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Station de travail Z2 format tour G4 boardview and Station de travail Z2 format tour G4 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no...09-12-2024, 02:20 PM
-
This specification for the MSI Gaming GF66 11UG-820FR Katana Dragon Station Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the GF66 11UG-820FR Katana Dragon Station boardview and GF66 11UG-820FR Katana Dragon Station schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note...09-07-2024, 05:20 AM
Comment