I got a used A7M266 (1.04)
And tried putting in a T-Bred B from wich I was certain it still worked - and it died.
With some Measurements:
the V-Out of the CPU VRM was around 0,3V - and getting really really hot...
With a TBird it is around 1,85V and works more or less...
I tried setting the Voltage manually, didn't change anything (well, it was ~1,65V without the CPU. And also with the TBird)...
Another Thing: one of the 4V/820uF Caps (those Yellow Fujitsu or so).
What can I do??
And tried putting in a T-Bred B from wich I was certain it still worked - and it died.
With some Measurements:
the V-Out of the CPU VRM was around 0,3V - and getting really really hot...
With a TBird it is around 1,85V and works more or less...
I tried setting the Voltage manually, didn't change anything (well, it was ~1,65V without the CPU. And also with the TBird)...
Another Thing: one of the 4V/820uF Caps (those Yellow Fujitsu or so).
What can I do??
Comment