Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting Computer Displays
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 10-17-2020, 10:11 AM   #21
R_J
Badcaps Veteran
 
Join Date: Jun 2012
City & State: ☻
My Country: Canada
I'm a: Professional Tech
Posts: 6,349
Default Re: Samsung Syncmaster 245b BN44-00195A

ICP801S (TDA4863) VCC is on PIN8. It gets that voltage from the M_VCC line. QB802 is the regulator/switch for this voltage. The source of the voltage is from TB801S,pin5, this is rectified by DB803 and filtered by CB806. The voltage at this point should be around +25vdc.
When pc801S is turned on by ON/OFF, Pin4&3 supply the +25v to the base of QB802 turning it on, the voltage on QB802 is set by ZDB805 + DB804 This will result in about +16vdc on QB802 emitter.

P6KE300A is a spike suppressor diode and not for supplying vcc voltage
The VZ is the internal zener diode for protection on the vcc line, The VCC for the ic to turn ON is minimum 12.5vdc, I suspect it operates around 16VDC, If the VCC drops to 10vdc the ic will turn off.

Last edited by R_J; 10-17-2020 at 10:29 AM..
R_J is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2020
Powered by vBulletin ®
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 11:14 AM.
Did you find this forum helpful?