Go Back   Badcaps Forums > Motherboards with Bad Capacitors > ECS - EpoX - Gigabyte
Register FAQ Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Old 11-20-2017, 08:19 AM   #1
Badcaps Veteran
Join Date: Nov 2015
City & State: quezon city
My Country: philippines
Line Voltage: 220vac
I'm a: Knowledge Seeker
Posts: 992
Default ECS P4M800Pro-M Ver 2.0 No display

I have this motherboard which turns on but no display. I already done replaced processor,ram, and reflashed the bios with external programmer, also i reflowed chipset, but still there is no display. when i removed the memory there is no beep. could anyone help on this if there is a chance this board to have display?thanks in advance
String2016 is offline   Reply With Quote
Old 11-20-2017, 12:30 PM   #2
Dan81's Avatar
Join Date: Oct 2013
City & State: Romania
My Country: Bacau
Line Voltage: 230VAC 50Hz
I'm a: Hobbyist Tech
Posts: 770
Default Re: ECS P4M800Pro-M Ver 2.0 No display

Replace the 4 small caps near the CPU socket. These are counterfeit lytics that ECS liked to use.
Main rig:
DFI Lanparty DK P45-T2RS, Intel Xeon X5450 3.00GHz, Sapphire Radeon R7 240 2GB DDR3, 8GB DDR2-800, LiteOn DVD-RW drive, RPC 500LBL 500W (rebuilt), AVerMedia Super 009 TV tuner, Samsung HD103SI 1TB, noname black case
Dan81 is offline   Reply With Quote
Old 11-23-2017, 06:49 AM   #3
New Member
Join Date: Nov 2017
City & State: Mérida
My Country: Spain
I'm a: Knowledge Seeker
Posts: 5
Default Re: ECS P4M800Pro-M Ver 2.0 No display

You can do the followed tests:

- To test if monitor works: use other monitor to your PC and use your monitor with a different PC

- To test if you PSU works: use a different PSU

- To test if you have graphics problems: you other PCI graphic card

Good Luck!
frica is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump Technical Forums © 2003 - 2018
Powered by vBulletin ®
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 05:55 AM.

Did you find this forum helpful?