Re: TOA 900 series ii Amplifier P-912MK2
I have disconnected and removed the pcb a few times thus far, the most recent being after the fuse popped.
I did notice something upon removing the pcb this time. It appears that par of the trace is damaged. Appears to be the section connecting Pin 3 on cn106 to ry101.
At first I thought this may have occurred after the fuse issue, but looking back at a previous photo from earlier in the night, the issue was already there. Please see attached photos.
The photo with red circles is prior to the fuse/short issue. The other is after the fuse popped, but also after I touched it.
Could this be the sole issue? How can I repair this?
I have disconnected and removed the pcb a few times thus far, the most recent being after the fuse popped.
I did notice something upon removing the pcb this time. It appears that par of the trace is damaged. Appears to be the section connecting Pin 3 on cn106 to ry101.
At first I thought this may have occurred after the fuse issue, but looking back at a previous photo from earlier in the night, the issue was already there. Please see attached photos.
The photo with red circles is prior to the fuse/short issue. The other is after the fuse popped, but also after I touched it.
Could this be the sole issue? How can I repair this?
Comment