When first plugged in the TV clicks and screen glows gray, then cycles off and on again several times until it says on with a loud buzzing noise from speakers and distorted pic.
I disconnected LVDS cable and jumpered pins 3 and 4 of logic board, which results in the test pattern showing, but still continues the cycling on and off, so basically I get a solid white, then red, then green screen from the test pattern before the TV restarts itself and repeats until the buzzing happens.
It never gets past the third solid green test screen even when buzzing starts. You can also see some pixels flickering in the solid screen.
I disconnected LVDS cable and jumpered pins 3 and 4 of logic board, which results in the test pattern showing, but still continues the cycling on and off, so basically I get a solid white, then red, then green screen from the test pattern before the TV restarts itself and repeats until the buzzing happens.
It never gets past the third solid green test screen even when buzzing starts. You can also see some pixels flickering in the solid screen.
Comment