Hi all,
I have a dead video card with some bulging caps. I've always been interested in just how easy it would be to resurrect a piece of hardware by simply replacing the caps, so now is a good time to give it a go!
The bad caps are KZG 1500uF/6.3V. I was wondering if the following would be a suitable replacement?
https://au.rs-online.com/web/p/alumi...itors/0571969/
They are the same rating and a similar size, but I have no idea about ESR and anything else that may need to match in order to be suitable. I am new to this and still reading through the forum, but any help/direction would be appreciated!
Cheers.
I have a dead video card with some bulging caps. I've always been interested in just how easy it would be to resurrect a piece of hardware by simply replacing the caps, so now is a good time to give it a go!
The bad caps are KZG 1500uF/6.3V. I was wondering if the following would be a suitable replacement?
https://au.rs-online.com/web/p/alumi...itors/0571969/
They are the same rating and a similar size, but I have no idea about ESR and anything else that may need to match in order to be suitable. I am new to this and still reading through the forum, but any help/direction would be appreciated!
Cheers.
Comment