Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting Laptops, Portable, and Mobile Devices
Register FAQ Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Old 11-07-2019, 05:20 PM   #1
Senior Member
Join Date: Jun 2018
City & State: Brampton
My Country: Canada
I'm a: Knowledge Seeker
Posts: 179
Default MacBook Air 1466 820-3437-B missing ALL_SYS_PWRGD

Hi all, working on a MacBook Air 1466 820-3437-B. It had liquid spill on the BIOS chip U6100, U1950 & corrosion on 2-3 passive components. I cleaned the board & replaced U1950 as some pins were rusted. After replacing I got all voltages except the ALL_SYS_PWRGD voltage & got a fan spin but no display/image. Since the spill was near the BIOS chip I replaced that too & got all voltages & display was perfect, kept it on for a very long time. Upon re-assembly I turned unit on but ALL_SYS_PWRGD is missing again. I get all the voltage, 3.3, 5V & 1.5 volts but no CPUVR volts & no volts on L7310/L7320. Does anyone tell me what am I missing yet to be checked. Thank you
mferna14 is offline   Reply With Quote
Old 11-08-2019, 03:14 AM   #2
Join Date: Jan 2016
City & State: Valbonne, 06
My Country: France
I'm a: Knowledge Seeker
Posts: 2,587
Default Re: MacBook Air 1466 820-3437-B missing ALL_SYS_PWRGD

If ALL_SYS_PWRGD is missing, usually it means another S0 rail is missing as well. (excluding CPU VCore which requires ALL_SYS_PWRGD to turn on)
Check the list of power rails again.
OpenBoardview | IRC #[email protected]
piernov is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump Technical Forums 2003 - 2020
Powered by vBulletin ®
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 07:55 PM.
Did you find this forum helpful?