Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

Compaq with power issue

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Compaq with power issue

    Please i have this Compaq presario CQ60,when my costumer brought it a caps was burnt on the board and after clearning and changing the spoilt capasitor i notice U47 ic was warming,i changed it and i have power on the board now but when i press the switch the laptop doesn't on,i made another check on the board and notices any ic on the board warms again,please can any one help me with the diagram of the board
    Astrosphere MCP MB
    07241-5
    48.4J103.051
    That is the board number,tnx in advance
    Tags: None
    #2
    Re: Compaq with power issue

    Should be this one.
    Attached Files
    OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

    Comment

      #3
      Re: Compaq with power issue

      Please which page do you think i should check?

      Comment

        #4
        Re: Compaq with power issue

        Please mine is CQ60,any one

        Comment

          #5
          Re: Compaq with power issue

          MB is Wistron Astrosphere, should be ok. Check if 3.3V/5V is present and if you have 3.3V on power button. Check if PM_RSMRST#, PWRBTN#_MCP and PM_SLP_S5# gets high after pressing power button.
          OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

          Comment

            #6
            Re: Compaq with power issue

            After making the checks am not getting 3.3v under switch and U56 becomes hot when i put in the charger but power jack Led shows on,please what maybe the cause of U56 becoming hot?tnx

            Comment

              #7
              Re: Compaq with power issue

              Hi
              Messure Pin8,16,17 from icU56

              Comment

                #8
                Re: Compaq with power issue

                After measuring with charger plugged in i had
                Pin8-3.2v
                pin16-4.9v
                Pin17-0v

                Comment

                  #9
                  Re: Compaq with power issue

                  messure Pin17 because a short to ground
                  also can U56 be defect

                  Comment

                    #10
                    Re: Compaq with power issue

                    After taking measure again i got
                    Pin8/3.2v
                    Pin16/18.9v
                    Pin17/4.9v
                    Thats when i plug in the charger,is U56 defeat?

                    Comment

                      #11
                      Re: Compaq with power issue

                      I have the same motherboard CQ60 and the power jack led is on when i pluck the adapter and led 1 is on when i press the power button no led 3 and there no firther action and the the U48 start to be warm as usual and cpu fan not spinning, where i will start searching? any one has the boardview cause i cant finde som component like U47 or U56..?
                      than you in advance

                      Comment

                      Previous template Next
                      Working...
                      X