This budget board was purchased knowing it was going to be recapped. The main caps are either Chemicon KZG or Sanyo WX or a mix of both, depending on which board you got. The rest are G-Luxon 1000uf 10v (12 pieces) so the G-Luxons were recapped with Rubycon MCZ 1000uf 10v.
most of it was quite easy except for the 3 in between the ram slots and the 2 near the cpu where i was struggling and worried i might damage the board. i booted it up and started running memtest86+, working nice and then suddenly the board shut down! shit...........
being a professional i had forgotten to connect the cpu fan to the header. anyway its working now and passing test after test.....
most of it was quite easy except for the 3 in between the ram slots and the 2 near the cpu where i was struggling and worried i might damage the board. i booted it up and started running memtest86+, working nice and then suddenly the board shut down! shit...........
being a professional i had forgotten to connect the cpu fan to the header. anyway its working now and passing test after test.....
Comment