Re: Onkyo TX-NR616 won't stay powered on
Those voltages would be close to correct if the 0.64 was really -0.64v
I would like to have seen the voltages that would be going to the Bases of the finals also.
So far I dont see a strong reason for the last set of finals failing.
The 2.4v between the Bases of Q5446 and Q5436 is higher than the 2v I calculate it should be.
Measure this voltage on the good channel. There is no need to modify anything on the good channel
Originally posted by tibimakai
View Post
I would like to have seen the voltages that would be going to the Bases of the finals also.
So far I dont see a strong reason for the last set of finals failing.
The 2.4v between the Bases of Q5446 and Q5436 is higher than the 2v I calculate it should be.
Measure this voltage on the good channel. There is no need to modify anything on the good channel
Comment