Re: Indesit IDC75 condenser dryer not stopping
Well decided to disassemble and as suspected the contact between A9 and A12 were welded shut, separated the connection, cleaned contacts and re-assembled. All good now!
The contact was the very last contact to be accessed so a full disassembly was required.
No amount of tapping would have freed it in this case but had already tried that, thanks
Thanks again for the help/advice, very much appreciated.
Well decided to disassemble and as suspected the contact between A9 and A12 were welded shut, separated the connection, cleaned contacts and re-assembled. All good now!
The contact was the very last contact to be accessed so a full disassembly was required.
No amount of tapping would have freed it in this case but had already tried that, thanks
Thanks again for the help/advice, very much appreciated.
Comment