Samsung PS42Q97HD still clicking and turning of after repair

[Mark845]

Hi

I've got a Samsung PS42Q97HD that makings a clicking noise and turns of. I ordered a repair kit for it from ebay. I've replaced the caps that came with the kit buts still making the same noises after the repair.

Does anyone know if they is anything else I could try?

That board that's in the tv is BN44-00161A

[vinceroger69]

Re: Samsung PS42Q97HD still clicking and turning of after repair

maybe worth a read
https://www.badcaps.net/forum/showth...sung+PS42Q97HD
may be worth checking these parts on your board if they did not come in your kit
http://www.ebay.co.uk/itm/CLICKING-1...-/271099719223

[dick_barton]

Re: Samsung PS42Q97HD still clicking and turning of after repair

Follow the troubleshooting guide

[ReeceyBurger123]

Re: Samsung PS42Q97HD still clicking and turning of after repair

Solder joints on relays or trannys.

[valvelover]

Re: Samsung PS42Q97HD still clicking and turning of after repair

just thought id post this case its of help to someone ? ive had this set from new (about 10 years now ) week or so ago it started clicking, sometimes turn on then click after awhile, other times clicking from startup............... took the back off expecting to find some bulged caps (it is a samsung ) but they all looked fine ? so had a look on here and saw mr reeceyburgers comment about soldering the trannys.......... took the power board off......nothing looked that bad, just quite a few joints duller than the rest...........so i touched up most of the power semiconductors, big caps. and any others that looked iffy?..............sets been working for over a week now..........so i'll call that job done !