Re: Gigabyte K8VM800M - What's causing this video problem?
I once had a socket A board made by Megatrend Axper K7V400 that was quite thinner then most boards. It would warp just by looking at it. I "fixed it" by putting a hard rubber spacer about 1/8" taller than the chassis spacers under the center of the board between the CPU and the Northbridge. The thing worked fine after this fix. One of those cheap Tiger Direct Specials.
I once had a socket A board made by Megatrend Axper K7V400 that was quite thinner then most boards. It would warp just by looking at it. I "fixed it" by putting a hard rubber spacer about 1/8" taller than the chassis spacers under the center of the board between the CPU and the Northbridge. The thing worked fine after this fix. One of those cheap Tiger Direct Specials.
Comment