hat are you measuring?

Super Nade

Badcaps Veteran

Join Date: Jun 2006

Posts: 294
#1

hat are you measuring?

06-10-2007, 05:02 PM

Hey guys,

I was taking a break from studying for my exam and I wrote this up. It is going to be put up on the overclockers.com front page. What do you think?

Attached Files

What are you measuring?.pdf (63.3 KB, 19 views)

Q6700 @ 3.6 GHz
Zippy GSM-6600P
Curcial Ballistix PC6400 (4 x 1Gb) Micron D9GMH
Abit IP35Pro
ATi HD4870
Tags: None

Previous template Next

Yageo 400V 680uF measuring 580uF

by jm1234

Hi,
I have a Yageo 400V 680uF that is currently measuring 580uF (Measured by UNI-T UT603). Does that normally qualify for replacement?
Details: Siemens tumble dryer getting Error 25 after an hour or so, on all last 3 runs.
I checked the circuit boards quickly and this capacitor sticks out, nothing visible, not even bulging though. It costs 12euro, so I'd like to get your feedback first. The main thing on that board seems to be a motor controller (for the compressor) https://www.mouser.sk/ProductDetail/...xvzUNHBQ%3D%3D.
Thanks...
- Channel: General Capacitor Questions & Issues
01-12-2024, 10:13 AM
Measuring ESR in-circuit: LCR or ESR meter

by Rado108

Hello. Which tool is better for in-circuit testing of e-caps? I was thinking about getting proper LCR meter like DER DE5000 but as i have seen more accurate are ESR meters like ESR70 from Peak if we are measuring in-circuit. Is that true?
Sometimes ESR can not be accurate when in-circuit but still want to get the best tool for it.
- Channel: General Capacitor Questions & Issues
09-10-2023, 10:42 AM
bad delid on 12900K, have anyone measuring of components on top of cpu?

by ktmmotocross

have this badly delided intel 12900K wth knock off components, have anyone measurements of components on top of cpu?
- Channel: Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
11-21-2024, 09:05 AM
ACER XB27 , shorted tcon, bad caps?

by danishaznita

Good day all ,

I have a ACER XB27 that go onto only to white screen .

Upon disaasembly, a Transistor at Q308 is burned good, and two big ceramic caps beside it is blacken . I removed both component , and checked for short (between Fuse and ground) and get 37 ohm, which is still too low .

After weeks of digging old posts about Tcon , i stumble upon this old post from 2017 (https://www.badcaps.net/forum/showpo...0&postcount=19), which user momaka wrote

" first measuring the resistance from each of those test points...
- Channel: Troubleshooting Computer Displays
01-07-2023, 07:57 AM
Theory on Negative Voltages Please...

by reessi

Hi there,

Last year I was trying to repair a laser machine that required +12v and -12v to control the servos for the mirrors. I did not fix the power supply but was trying to test it using an ATX power supply. The + side worked a bit but the negative did not, I tested the current draw through the meter on the +ve side and it was around 3 amp and so the -ve side could not pull enough since the ATX was only rated at 0.8 amp and tested at 1 amp through the meter.

Last night while building a bench power supply I had an idea and after some reading thought it should work....
- Channel: General Electronics Technical Discussion
10-18-2021, 10:29 AM
Loading...
No more items.

hat are you measuring?

hat are you measuring?

Related Topics