HP Netraid 4si Firmware Upgrades/Drivers

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • NxB
    Badcaps Legend
    • Feb 2009
    • 1595
    #1

    HP Netraid 4si Firmware Upgrades/Drivers

    I have an HP Netraid 4si controller I'm trying to upgrade. Its very similar to the 3si but it has 4 ports.

    Thing is, I can't find any link to drivers or updates on the HP site. I tried the 3si stuff and while the drivers/software work, the firmware updates don't.

    Any ideas?
    Tags: None
    • bgavin
      Badcaps Legend
      • Jan 2007
      • 1355
      #2
      Re: HP Netraid 4si Firmware Upgrades/Drivers

      If you can identify the PCI ID, you can probably find drivers from Driverpacks.Net.

      You will need:
      VEN_xxxx
      DEV_xxxx
      SUBSYS_xxxxyyyy

      Very often, the SUBSYS won't be a perfect match, and the drivers work just fine. The first two have to match.

        Comment

        • NxB
          Badcaps Legend
          • Feb 2009
          • 1595
          #3
          Re: HP Netraid 4si Firmware Upgrades/Drivers

          I'm still SOL on the firmware. There is no page at HP for this card. The only thing I find are documents. The 3si has updates that correct issues going till 2005. This one seems to be stuck in 2000.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • slavetothesound
              HP ProDesk 600 G6 Mini BIOS unlocked - now EC can't find valid firmware
              by slavetothesound
              I Used a T48 and RCUnlocker to remove password from the BIOS on a previously fully functional HP ProDesk 600 G6 Mini. Everything went very smoothly and I was able to boot the machine and install an OS. I then unplugged the machine and put it on the shelf for a week.

              Now when I boot the machine, it does not POST. It plays 5.2 beep codes which are interpreted as:


              I read the firmware with the T48 and it is different than what I flashed to it, so I flashed the unlocked firmware that I had saved. No change. I could use some advice on next steps to take.

              ...
              04-12-2024, 10:05 AM
            • GardevoirForEver
              Embedded Controller issues, living an absolute H*LL with my ASUS Vivobook Pro 16X OLED
              by GardevoirForEver
              I've been dealing with so many complications for months, trying to find and then fix the root cause of the issue I really need help and I have to solve this on my own (Going to Asus headquarters isn't an option for me. First, because I'm very stubborn and want to insist that I can fix this sort-of-myself somehow, and second, the location is too far away for me anyway).

              Right now I'm desperate trying to put an end to this nightmare, but OK, I'll do my best to be somewhat brief in explaining and relating the entire situation and context.

              ==
              The motherboard of my ASUS...
              11-15-2025, 04:30 PM
            • gurj1979
              Ubiquiti firmware help. US-8-150W POE
              by gurj1979
              Hi guys.

              I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
              Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.

              So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
              Got New chip and writes good.

              THE PROBLEM...
              It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.

              Does anyone have a Good Firmware I can have?...
              07-22-2024, 05:13 PM
            • Slapito
              Request for EC firmware for MSI Vector GP66 12UHSO (MS-15441 ver 1.0)
              by Slapito
              I'm currently repairing an MSI Vector GP66 12UHSO laptop with a motherboard reference MS-15441 ver 1.0. The EC chip (ENE KB9548QF2) on the board appears to be damaged and needs to be reprogrammed.

              Can someone please send me the firmware (EC/Embedded Controller) or indicate where I can download the correct EC firmware version corresponding to this motherboard model?

              I already have access to the BIOS downloads on the MSI support page, but need specifically the EC binary or its equivalent firmware image.

              I already downloaded the BIOS update file from msi official...
              10-09-2025, 02:00 AM
            • titomno2
              Surface Pro 7 type 1866 PD controller firmware issue
              by titomno2
              Hi guys,

              Hope you are fine.
              I'm struggling to fix a small issue with one of the tablet Surface Pro 7 type 1866 i'm fixing (windows 11).
              The boot time is so long (up to 5-10 minutes).
              After several attempt I finally find one thing is not right (PD controller firmware is 0.0.0 it can't update to 3.6.1) under device manager I have a yellow mark, code 14 and error as decribed on picture attached.
              I don't find any information regarding the error code 0x1803 (and sometimes it change to 0x1804.
              In the past I have found that if the update is a success, the boot...
              2 Photos
              04-27-2025, 01:02 AM
            • Loading...
            • No more items.
            Working...