33000 uF x 10v @ 10mm OD?

[ron350]

33000 x 10v @10mm OD?

Does anyone sell a 3300 uF x 10 volt in a 10mm OD case that is rated better than the Rubycon PX series?

Thanks
Ron

[mockingbird]

Re: 33000 uF x 10v @ 10mm OD?

If this is for a computer PSU, you don't really need a 10V part. 6.3V 3300uF will work as well, because 10V caps are either on the 5V or 3.3V rail.

Panasonic FK
Rubycon ZLJ

If you really need a cap in 10mm that is capable of at least 10V, our member 'Behemot' sells a Samxon RS series cap in 10mm that's 16V (So it will handle 10V as well). Here is the product from his eBay store:
http://cgi.ebay.com/300946916982

[ron350]

Re: 33000 uF x 10v @ 10mm OD?

Thank you kind Sir for going to the trouble of posting the links.
I will take your advice and replace the bad 6.3 volt “HM”with 6.3 volt ZLJ.

Also good to know where to buy those 10 volt Samxon.

Thanks
Ron

[mockingbird]

Re: 33000 uF x 10v @ 10mm OD?

No no no, hold your horses....

You cannot replace HM with ZLJ. You need to replace it with an equivalent Ultra Low-ESR series capacitor.

If you want a direct replacement for Nichion HM, the part number from Digikey is UHM0J332MPD-ND, and it is in stock.

Please make a post with more details about your computer. Post pictures of your motherboard and list your power supply model.